Open Access Open Access  Restricted Access Subscription Access
Signal constellation of 19-AMMC-signal with 3 components

Research on properties of devices for shaping and processing of signals based on amplitude modulation of many components

Ivan V. Horbatyi


Devices for shaping and processing of signals based on known varieties of digital amplitude-phase modulation are considered. Their disadvantages are exposed during realization of modulation and demodulation of the signals that are characterized by non-rectangular signal constellations. There are explored properties of devices for shaping and processing of signals based on a new variety of signal modulation, namely amplitude modulation of many components (AMMC). The results of carried out researches show that advantages of proposed AMMC modulator are simplification of phase modulated or amplitude-phase modulated signal shaping, in particular AMMC signal shaping, and improve of modulator internal interference protection. Advantages of AMMC demodulator are simplification of phase modulated or amplitude-phase modulated signal processing, in particular AMMC signal processing, and improve of demodulator internal interference and zero drift protection at its practical realization. The proposed AMMC modulator and demodulator can be applied for shaping and processing of signals based on known and new varieties of amplitude-phase modulation.


amplitude-phase modulation; amplitude modulation of many components; signal modulation; signal demodulation

Full Text:



AYAT, M.; MIRZAKUCHAKI, S.; BEHESHTI-SHIRAZI, A. “Design and implementation of high throughput, robust, parallel M-QAM demodulator in digital communication receivers,” IEEE Trans. Circuits Systems I: Regular Papers, v.63, n.8, p.1295-1304, 2016. DOI:

GANGADHARAPPA, M.; KAPOOR, R.; DIXIT, H. “An efficient hierarchical 16-QAM dynamic constellation to obtain high PSNR reconstructed images under varying channel conditions,” IET Commun., v.10, n.2, p.139-147, 2016. DOI:

SALMANI, M.; NEKUII, M.; DAVIDSON, T.N. “Semidefinite relaxation approaches to soft MIMO demodulation for higher order QAM signaling,” IEEE Trans. Signal Processing, v.65, n.4, p.960-972, 2017. DOI:

ELASHKAR, N.E.; IBRAHIM, G.H.; ABOUDINA, M.; FAHMY, H.A.H.; KHALIL, A.H. “All-passive memristor-based 8-QAM and BFSK demodulators using linear dopant drift model,” Proc. of 5th Int. Conf. on Electronic Devices, Systems and Applications, ICEDSA, 6-8 Dec. 2016, Ras Al Khaimah, United Arab Emirates. IEEE, 2016, p.1-4. DOI:

LIU, T.; DJORDJEVIC, I.B. “Signal constellation design for cross-phase modulation dominated channels,” IEEE Photonics J., v.7, n.4, 2015. DOI:

FERRARI, G.; AMADEI, U. “Two-level quantized soft-output demodulation of QAM signals with gray labeling: A geometric approach,” IEEE Commun. Lett., v.20, n.10, p.1931-1934, 2016. DOI:

PATHAK, C.; RAWAT, K. “Quadrature modulation using radio frequency wave correlation in multiport network,” Proc. of 5th Int. Conf. on Signal Processing and Integrated Networks, SPIN, 22-23 Feb. 2018, Noida, India. IEEE, 2018, p.796-799. DOI:

SKLAR, B. Digital Communications: Fundamentals and Applications, 2nd ed. New Jersey: Prentice-Hall, 2001.

POLITANSKYI, R.; KLYMASH, M.; BOBALO, Y. “The data transferring systems with using of the chaotic signals non-coherent detection,” Proc. of 12th Int. Conf. on Modern Problems of Radio Engineering Telecommunications and Computer Science, TCSET 2014, 1 Mar. 2014, Lviv-Slavske, Ukraine. Lviv, 2014, p.433.

GORBATYY, I.V. “Optimization of signal-code constructions using the maximum efficiency criterion,” Radioelectron. Commun. Syst., v.56, n.12, p.560-567, 2013. DOI:

GORBATYY, I.V. “Investigation of the technical efficiency of state-of-the-art telecommunication systems and networks with limited bandwidth and signal power,” Automatic Control Computer Sci., v.48, n.1, p.47-55, 2014. DOI:

HORBATYI, I.V. UA Patent 91950, Byull. Izobr., n.17, 2010.

© Radioelectronics and Communications Systems, 2004–2021
When you copy an active link to the material is required
ISSN 1934-8061 (Online), ISSN 0735-2727 (Print)
tel./fax +38044 204-82-31, 204-90-41